Flashing Silverware With A MacBook
Silverware is an open-source flight controller firmware developed by GitHub user silver13 for the H8 mini, BWhoop B03, Eachine E011, and E011C FCs. It was forked and further refined by GitHub user NotFastEnuf. It gives you acro mode, is optimized for the STM32F0 processor and is very well-tuned for brushed motors (especially the NotFastEnuf fork).
Eachine E011 Transmitter Battery Mod
The Eachine E011 transmitter takes in 3 AAA batteries. But alkaline batteries almost always suck and Eneloops are rather expensive. And they often tend to inexplicably disappear. Besides, I have a lot of LiPo batteries that I use on quadcopters so it makes sense to make use of them in other battery-operated equipment where possible. This mod is simple and easy and should be applicable to most transmitters similar to the Eachine E011’s. Plus you should still be able to use AAA batteries.
Parts and Equipment
For this mod, you need the following:
- Molex battery male connector
- LiPo battery with Molex battery female connector
- Soldering iron
- Soldering wire
- Wire snips
- Philips screwdriver
Procedure
Flysky i6 and Beecore Quickstart Guide
This is a newbie’s quickstart guide for the Flysky i6 transmitter (TX) and the Beecore flight controller (FC). The guide assumes that you have a fresh Beecore-based Tiny Whoop build and that you already have your USB drivers and Betaflight Configurator installed.