Posts

Posted on

Makerfire VR006 Unboxing

Specifications

  • Size: 138*129*79mm (without antenna)
  • Weight: 164.7g
  • Display: 3 inches
  • Resolution: 800*600 pixels
  • Antenna Connector: RP-SMA
  • Working Voltage: 1s Battery (3.7-4.2v)
  • Working Current: 350-450mA
  • Receiving Sensitivity: -95dBM
  • Built-in Battery: 500mAh 3.7V
  • Working Time: 1h

Features

  • Small and Light, convenient to carry
  • With One Key Auto Search function.
  • Only English available.
  • Support OSD function, can display current power
  • Support AV-IN
  • Single receiver with clover and panel antenna, stronger receiving signal.
  • Built-in 3.7V 500mAh battery, 1h working time.

Package Contents

VR006
RP-SMA Antenna
Head strap
USB charging cable
Cleaning wipes

Posted on

Tiny Whoop Canopy Survey

Weighed the canopies I got my hands on. Will add canopies as I come across them.

Also check out my frame survey.

Boldclash F01 Crazepony/RKH Clear Makerfire Armor 65 Lite V1
X-Racer X-1 Armor 65/Tiny 6/Tiny 7 Boldclash BWhoop

Happymodel Mobula7
Makerfire Armor 65 Lite V2


Posted on

Fatshark Dominator HD Refresh

I finally bit the bullet and pulled the trigger on my first real FPV goggles. I’m used to the wide field of view of my OTG receiver with Android phone mounted on a VR headset so I wanted to have the widest FOV possible. The widest would have been the Dominator HD2 at 50 degrees but I’m actually fine down to the 42 degrees of the Dominator HD3. So when I spotted a well-cared for Dominator HD at 45 degrees, I grabbed it.

Continue reading “Fatshark Dominator HD Refresh”

Posted on

Jumper T8SG V2 Plus Unboxing

Specifications

  • Size: 158 x 150 x 58mm
  • Weight: 338g (without battery)
  • Transmission frequency: 2.400GHZ-2.7GHZ
  • Transmitter Module: Four-in-One High Frequency Module (CC2500 CYRF6936 A7105 NRF2401)
  • Transmit power: maximum 22dbm (transmit power adjustable)
  • Antenna gain: 2db (detachable antenna, easy modification)
  • Working current: [email protected]
  • Working voltage: DC4.5-DC18V (factory with 4 x AA battery box, lithium battery recommended 2s balanced head line, batteries not included)
  • Remote control distance: over 2km @ 22dbm
  • Firmware: DeviationTX
  • Number of channels: up to 12 channels (depending on the receiver)
  • Display: 2.42-inch OLED display, 128 * 64 resolution
  • Rocker way: non-contact 3D space vector Hall joystick
  • JR/FrSKY compatible module bay on rear side
  • Upgrade method: USB online upgrade
  • Supported Protocols:
    • Walkera full range
    • DSM2/X full range
    • Flysky and Flysky 2A
    • FrSKY
    • FUTABA S-FHSS full range
    • WL Toy series, Hubsan series, Esky series and many more (Currently a total of more than 40 supported protocols)
  • Uses open source software with continued support and development, adding new protocols regularly.
  • Simulator mode: 3.5mm standard ppm output
  • USB output.

Features

  • Built in four-in-1 RF Module (CC2500 CYRF6936 A7105 NRF2401).
  • Open source multi-protocol firmware, compatible with most mainstream remote controls
  • Non-contact 3D space vector Hall remote sensing Gimbals
  • 2.42 inch OLED display, Bright display works even in direct sunlight.
  • JR/FrSKY compatible module bay on rear side.
  • USB online firmware upgrade.
  • Transmission power adjustable to adapt to different location requirements.
  • Detachable antenna, easy to change.
  • Ultra-low power consumption, longer battery life.
  • Up to 12 channels of output (depending on the receiver), Open Source Firmware, all channels are fully programmable.
  • Wide voltage input (2s lipo recommended).
  • Multilingual menu.
  • Vibration reminder function.
  • Support telemetry (depending on the receiver).
  • Carry Case included.

Package Contents

1 Jumper T8SG V2 Plus transmitter
1 neck strap
1 transmitter case
1 quick start guide